Description
DISCONTINUED
The Dive Electronics B-1000 underwater backup dive light for diving is suitable for all types of recreational, technical and cave diving. It can be used as a secondary (backup) dive light, or as a primary light for simple tasks. Suitable for warm and cold water.
Optionally, there is a version with only 1 most powerful mode
The set consists of:
– B-1000 dive light
– 18650 3400mAh battery
– charger
To charge the battery, it is necessary to unscrew the light head, remove the battery and insert it into the charger. After that, plug the charger into a socket. When the LED on the charger turns green, charging is complete. Before screwing the light head back on, it is essential to clean the O-rings on the housing and apply a thin layer of thick silicone grease to them.
The dive light must be transported and stored with the battery removed
Technical specifications
| Maximum luminous flux of the dive light, lm | 750-1000 |
| Beam angle, deg | 6 |
| Number of operating modes (optional) | 5 (1) |
| Battery capacity (Li-ion), maximum possible, mAh | 5500 |
| Run-time from a 5500mAh battery at maximum power, min | 100 |
| “SOS” mode | available |
| Maximum depth, m | 150 |
| dimensions, mm | 45×130 |
